华为无线设备配置全局双链路冷备份（AC全局配置方式）（华为ac双链路备份技术）

华为无线设备配置全局双链路冷备份（AC全局配置方式）（华为ac双链路备份技术）

1. 配置LSW和AC，使AP和AC互通

[LSW1]vlan batch 100 101

[LSW1-GigabitEthernet0/0/1]port link-type trunk

[LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100

[LSW1-GigabitEthernet0/0/2]port link-type trunk

[LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 100

[LSW1-GigabitEthernet0/0/3]port link-type trunk

[LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 100 101

[LSW1-GigabitEthernet0/0/3]port trunk pvid vlan 100

[LSW1-GigabitEthernet0/0/3]port-isolate enable

[AC1]vlan batch 100 101

[AC1-GigabitEthernet0/0/1]port link-type trunk

[AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100

[AC2]vlan batch 100 101

[AC2-GigabitEthernet0/0/1]port link-type trunk

[AC2-GigabitEthernet0/0/1]port trunk allow-pass vlan 100

2. 配置LSW的DHCP功能，为AP和STA分配IP地址

[LSW1]dhcp enable

[LSW1]int Vlanif 100

[LSW1-Vlanif100]ip add 10.1.100.1 24

[LSW1-Vlanif100]dhcp select interface

[LSW1-Vlanif100]dhcp server excluded-ip-address 10.1.100.2 10.1.100.3

[LSW1]int Vlanif 101

[LSW1-Vlanif101]ip add 10.1.101.1 24

[LSW1-Vlanif101]dhcp select interface

3. 配置AC1的WLAN基本业务

（1）配置AP上线

创建AP组，用于将相同配置的AP都加入同一AP组中

[AC1]wlan

[AC1-wlan-view]ap-group name ap-group1

创建域管理模板，在域管理模板下配置AC的国家码并在AP组下引用域管理模板

[AC1-wlan-view]regulatory-domain-profile name domain1

[AC1-wlan-regulate-domain-domain1]country-code cn

[AC1-wlan-view]ap-group name ap-group1

[AC1-wlan-ap-group-ap-group1]regulatory-domain-profile domain1

配置AC的源接口

[AC1]int Vlanif 100

[AC1-Vlanif100]ip add 10.1.100.2 24

[AC1]capwap source interface Vlanif 100

在AC上离线导入AP，并将AP加入AP组

[AC1]wlan

[AC1-wlan-view]ap auth-mode mac-auth

[AC1-wlan-view]ap-id 0 ap-mac 00e0-fc76-5740

[AC1-wlan-ap-0]ap-name ap1

[AC1-wlan-ap-0]ap-group ap-group1

（2）配置WLAN业务参数

创建安全模板，并配置安全策略

[AC1]wlan

[AC1-wlan-view]security-profile name wlan-security

[AC1-wlan-sec-prof-wlan-security]security wpa2 psk pass-phrase abc@1234 aes

创建SSID模板，并配置SSID名称

[AC1-wlan-view]ssid-profile name wlan-ssid

[AC1-wlan-ssid-prof-wlan-ssid]ssid wlan-net

创建VAP模板，配置业务数据转发模式、业务VLAN，并且引用安全模板和SSID模板

[AC1-wlan-view]vap-profile name wlan-vap

[AC1-wlan-vap-prof-wlan-vap]forward-mode direct-forward

[AC1-wlan-vap-prof-wlan-vap]service-vlan vlan-id 101

[AC1-wlan-vap-prof-wlan-vap]security-profile wlan-security

[AC1-wlan-vap-prof-wlan-vap]ssid-profile wlan-ssid

配置AP组引用VAP模板，AP上射频0和射频1都使用VAP模板的配置

[AC1-wlan-view]ap-group name ap-group1

[AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio 0

[AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio 1

4. 配置AC2的WLAN基本业务

（1）配置AP上线

创建AP组，用于将相同配置的AP都加入同一AP组中

[AC2]wlan

[AC2-wlan-view]ap-group name ap-group1

创建域管理模板，在域管理模板下配置AC的国家码并在AP组下引用域管理模板

[AC2-wlan-view]regulatory-domain-profile name domain1

[AC2-wlan-regulate-domain-domain1]country-code cn

[AC2-wlan-view]ap-group name ap-group1

[AC2-wlan-ap-group-ap-group1]regulatory-domain-profile domain1

配置AC的源接口

[AC2]int Vlanif 100

[AC2-Vlanif100]ip add 10.1.100.3 24

[AC2]capwap source interface Vlanif 100

在AC上离线导入AP，并将AP加入AP组

[AC2-wlan-view]ap auth-mode mac-auth

[AC2-wlan-view]ap-id 0 ap-mac 00e0-fc76-5740

[AC2-wlan-ap-0]ap-name ap1

[AC2-wlan-ap-0]ap-group ap-group1

（2）配置WLAN业务参数

创建安全模板，并配置安全策略

[AC2-wlan-view]security-profile name wlan-security

[AC2-wlan-sec-prof-wlan-security]security wpa2 psk pass-phrase abc@1234 aes

创建SSID模板，并配置SSID名称

[AC2-wlan-view]ssid-profile name wlan-ssid

[AC2-wlan-ssid-prof-wlan-ssid]ssid wlan-net

创建VAP模板，配置业务数据转发模式、业务VLAN，并且引用安全模板和SSID模板

[AC2-wlan-view]vap-profile name wlan-vap

[AC2-wlan-vap-prof-wlan-vap]forward-mode direct-forward

[AC2-wlan-vap-prof-wlan-vap]service-vlan vlan-id 101

[AC2-wlan-vap-prof-wlan-vap]security-profile wlan-security

[AC2-wlan-vap-prof-wlan-vap]ssid-profile wlan-ssid

配置AP组引用VAP模板，AP上射频0和射频1都使用VAP模板的配置

[AC2-wlan-view]ap-group name ap-group1

[AC2-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio 0

[AC2-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio 1

5. 配置主用AC1和备用AC2双链路备份功能

在AC1上，配置备AC2的IP地址，AC1的优先级，用于双链路备份。全局使能双链路备份和回切功能，重启所有AP使双链路备份功能生效

[AC1-wlan-view]ac protect protect-ac 10.1.100.3 priority 0

[AC1-wlan-view]undo ac protect restore disable

[AC1-wlan-view]ac protect enable

在AC2上，配置主用AC1的IP地址，AC2的优先级，用于双链路备份

[AC2-wlan-view]ac protect protect-ac 10.1.100.2 priority 1

[AC2-wlan-view]undo ac protect restore disable

[AC2-wlan-view]ac protect enable

6. 验证配置

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。