【CCNA实验分享】三层交换机Vlan间路由（三层交换机vlan共同上网）

Switch>enable

Switch#

Switch(config)#hostname ED-SW

ED-SW(config)#vlan 10

ED-SW(config-vlan)#name engineering

ED-SW(config-vlan)#vlan 20

ED-SW(config-vlan)#name RD

ED-SW(config-vlan)#vlan 40

ED-SW(config-vlan)#name MGT-vlan

ED-SW(config-vlan)#exit

ED-SW(config)#int range f0/1 – 5

ED-SW(config-if-range)#switch mode access

ED-SW(config-if-range)#switch access vlan 10

ED-SW(config-if-range)#spanning-tree portfast

ED-SW(config)#int range f0/6 – 10

ED-SW(config-if-range)#switch mode access

ED-SW(config-if-range)#switch access vlan 20

ED-SW(config-if-range)#spanning-tree portfast

ED-SW(config-if-range)exit

ED-SW(config)#interface fa0/12

ED-SW(config-if)#switch mode trunk

ED-SW(config-if)#exit

ED-SW(config)#int vlan 40

ED-SW(config-if)#ip address 192.168.40.200 255.255.255.0

ED-SW(config-if)#no shut

ED-SW(config-if)#exit

ED-SW(config)#ip default-gateway 192.168.40.254

ED-SW(config)#line vty 0 4

ED-SW(config-line)#login

ED-SW(config-line)#password G-LAB

ED-SW(config-line)#exit

ED-SW(config)#enable secret G-LAB

C:\Documents and Settings\Joseph>ping{在PC1上做ping测试} 192.168.10.254

Pinging 192.168.10.254 with 32 bytes of data:

Reply from 192.168.10.254: bytes=32 time=1ms TTL=64

Reply from 192.168.10.254: bytes=32 time=1ms TTL=64

Reply from 192.168.10.254: bytes=32 time=1ms TTL=64

Reply from 192.168.10.254: bytes=32 time=1ms TTL=64

Ping statistics for 192.168.10.254:

   Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

   Minimum = 1ms, Maximum = 1ms, Average = 1ms

C:\Documents and Settings\Joseph>{在PC1上做ping测试}ping 192.168.20.254

Pinging 192.168.20.254 with 32 bytes of data:

Reply from 192.168.20.254: bytes=32 time=1ms TTL=64

Reply from 192.168.20.254: bytes=32 time=1ms TTL=64

Reply from 192.168.20.254: bytes=32 time=1ms TTL=64

Reply from 192.168.20.254: bytes=32 time=1ms TTL=64

Ping statistics for 192.168.20.254:

   Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

   Minimum = 1ms, Maximum = 1ms, Average = 1ms

C:\Documents and Settings\Joseph>{在PC1上做ping测试}ping 192.168.30.22

Pinging 192.168.30.22 with 32 bytes of data:

Reply from 192.168.30.22: bytes=32 time=1ms TTL=63{TTL值减少了1，说明经过了一台路由器}

Reply from 192.168.30.22: bytes=32 time=1ms TTL=63

Reply from 192.168.30.22: bytes=32 time=1ms TTL=63

Reply from 192.168.30.22: bytes=32 time=1ms TTL=63

Ping statistics for 192.168.30.22:

   Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

Approximate round trip times in milli-seconds:

   Minimum = 1ms, Maximum = 1ms, Average = 1ms

Core#sh ip route{查看核心交换机的路由表}

Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP

    D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area

    N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2

    E1 - OSPF external type 1, E2 - OSPF external type 2

    i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2

    ia - IS-IS inter area, * - candidate default, U - per-user static route

    o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

C 192.168.30.0/24 is directly connected, Vlan30

C 192.168.10.0/24 is directly connected, Vlan10

C 192.168.40.0/24 is directly connected, Vlan40

C 192.168.20.0/24 is directly connected, Vlan20{可以直接到达vlan10、20、30、40几个vlan。}

ED-SW#ping 192.168.40.254

Type escape sequence to abort.

Sending 5, 100-byte ICMP Echos to 192.168.40.254, timeout is 2 seconds:

!!!!!{ED-SW可以与Core互通}

Success rate is 100 percent (5/5), round-trip min/avg/max = 1/202/1004 ms

ED-SW#sh vlan b

VLAN Name             Status    Ports

---- -------------------------------- --------- -------------------------------

1 default             active    

10 test              active    Fa0/1, Fa0/2, Fa0/3, Fa0/4

Fa0/5

20 RD                active    Fa0/6, Fa0/7, Fa0/8, Fa0/9

Fa0/10

40 MGT-VLAN            active    

1002 fddi-default        active    

1003 token-ring-default    active    

1004 fddinet-default      active    

1005 trnet-default       active  

ED-SW#telnet 192.168.40.254

Trying 192.168.40.254 ... Open{说明ED-SW可以从远程登录到Core做管理}

User Access Verification

Password: G-LAB

Core>en

Password: G-LAB

Core#

Core#telnet 192.168.40.200 /source-interface vlan 40

Trying 192.168.40.200 ... Open{说明可以从其他的vlan远程登入到ED-SW作跨网段管理}

User Access Verification

Password: G-LAB

ED-SW>en

Password: G-LAB

ED-SW#