华为设备配置射频调优(华为射频硬件)

网友投稿 533 2022-09-15


华为设备配置射频调优(华为射频硬件)

1. 配置LSW和AC,使AP与AC之间能够传输CAPWAP报文

[LSW1]vlan batch 10

[LSW1-GigabitEthernet0/0/1]port link-type trunk

[LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 10

[LSW1-GigabitEthernet0/0/2]port link-type trunk

[LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 10

[LSW1-GigabitEthernet0/0/2]port trunk pvid vlan 10

[LSW1-GigabitEthernet0/0/2]port-isolate enable

[LSW1-GigabitEthernet0/0/3]port link-type trunk

[LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 10

[LSW1-GigabitEthernet0/0/3]port trunk pvid vlan 10

[LSW1-GigabitEthernet0/0/3]port-isolate enable

[AC1]vlan batch 10

[AC1-GigabitEthernet0/0/1]port link-type trunk

[AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 10

2. 配置AC与上层网络设备互通

[AC1]vlan batch 20 30 40

[AC1-Vlanif20]ip add 10.1.2.1 24

[AC1-Vlanif30]ip add 10.1.3.1 24

[AC1-Vlanif40]ip add 10.1.4.1 24

[AC1]ip route-static 0.0.0.0 0.0.0.0 10.1.4.2

[AC1-GigabitEthernet0/0/2]port link-type access

[AC1-GigabitEthernet0/0/2]port default vlan 40

3. 配置AC给AP分配IP地址,AR给STA分配IP地址

[AC1]dhcp enable

[AC1]int Vlanif 10

[AC1-Vlanif10]ip add 10.1.1.1 24

[AC1-Vlanif10]dhcp select interface  //配置AC通过接口地址池为AP分配IP地址

[AC1-Vlanif20]dhcp select relay  //配置AC作为DHCP中继并使能DHCP中继探测用户表项功能

[AC1-Vlanif20]dhcp relay server-ip 10.1.4.2

[AC1-Vlanif30]dhcp select relay

[AC1-Vlanif30]dhcp relay server-ip 10.1.4.2

[AR1]dhcp enable  //配置AR作为DHCP服务器为STA分配IP地址

[AR1]ip pool sta-ip-pool1

[AR1-ip-pool-sta-ip-pool1]gateway-list 10.1.2.1

[AR1-ip-pool-sta-ip-pool1]network 10.1.2.0 mask 24

[AR1]ip pool sta-ip-pool2

[AR1-ip-pool-sta-ip-pool2]gateway-list 10.1.3.1

[AR1-ip-pool-sta-ip-pool2]network 10.1.3.0 mask 24

[AR1-GigabitEthernet0/0/0]ip add 10.1.4.2 24

[AR1-GigabitEthernet0/0/0]dhcp select global

[AR1]ip route-static 10.1.2.0 24 10.1.4.1

[AR1]ip route-static 10.1.3.0 24 10.1.4.1

4. 配置VLAN pool,用于作为业务VLAN

[AC1]vlan pool sta-pool

[AC1-vlan-pool-sta-pool]vlan 20 30

[AC1-vlan-pool-sta-pool]assignment hash

5. 配置AP上线

[AC1]wlan

[AC1-wlan-view]ap-group name ap-group1  //创建AP组

[AC1-wlan-view]regulatory-domain-profile name domain1  //创建域管理模板,在域管理模板下配置AC的国家码并在AP组下引用域管理模板

[AC1-wlan-regulate-domain-domain1]country-code cn

[AC1-wlan-view]ap-group name ap-group1

[AC1-wlan-ap-group-ap-group1]regulatory-domain-profile domain1

[AC1]capwap source  interface Vlanif 10  //配置AC的源接口

[AC1]wlan

[AC1-wlan-view]ap auth-mode mac-auth

[AC1-wlan-view]ap-id 0 ap-mac 00e0-fcae-6d70  //在AC上离线导入AP

[AC1-wlan-ap-0]ap-name ap1

[AC1-wlan-ap-0]ap-group ap-group1

[AC1-wlan-view]ap-id 1 ap-mac 00e0-fc31-7140

[AC1-wlan-ap-1]ap-name ap2

[AC1-wlan-ap-1]ap-group ap-group1

6. 配置WLAN业务参数

[AC1-wlan-view]security-profile name wlan-security  //创建安全模板,并配置安全策略

[AC1-wlan-sec-prof-wlan-security]security wpa2 psk pass-phrase abc@1234 aes

[AC1-wlan-view]ssid-profile name wlan-ssid  //创建名SSID模板,并配置SSID名称

[AC1-wlan-ssid-prof-wlan-ssid]ssid wlan-net

[AC1-wlan-view]vap-profile name wlan-vap  //创建VAP模板,配置业务数据转发模式、业务VLAN,并且引用安全模板和SSID模板

[AC1-wlan-vap-prof-wlan-vap]forward-mode tunnel

[AC1-wlan-vap-prof-wlan-vap]service-vlan vlan-pool sta-pool

[AC1-wlan-vap-prof-wlan-vap]security-profile wlan-security

[AC1-wlan-vap-prof-wlan-vap]ssid-profile wlan-ssid

[AC1-wlan-view]ap-group name ap-group1  //配置AP组引用VAP模板,AP上射频0和射频1都使用VAP模板配置

[AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio all

7. 配置射频调优功能

[AC1-wlan-view]rrm-profile name wlan-net  //创建RRM模板,使能信道自动选择功能和发送功率自动选择功能

[AC1-wlan-rrm-prof-wlan-net]undo calibrate auto-channel-select disable

[AC1-wlan-rrm-prof-wlan-net]undo calibrate auto-txpower-select disable

[AC1-wlan-view]air-scan-profile name wlan-airscan  //创建空口扫描模板,并配置扫描信道集合、扫描间隔时间和扫描持续时间

[AC1-wlan-air-scan-prof-wlan-airscan]scan-channel-set country-channel

[AC1-wlan-air-scan-prof-wlan-airscan]scan-period 80

[AC1-wlan-air-scan-prof-wlan-airscan]scan-interval 80000

[AC1-wlan-view]radio-2g-profile name radio2g  //创建2G射频模板,并在该模板下引用RRM模板和空口扫描模板

[AC1-wlan-radio-2g-prof-radio2g]rrm-profile wlan-net

[AC1-wlan-radio-2g-prof-radio2g]air-scan-profile wlan-airscan

[AC1-wlan-view]radio-5g-profile name radio5g  //创建5G射频模板,并在该模板下引用RRM模板和空口扫描模板

[AC1-wlan-radio-5g-prof-radio5g]rrm-profile wlan-net

[AC1-wlan-radio-5g-prof-radio5g]air-scan-profile wlan-airscan

[AC1-wlan-view]ap-group name ap-group1  //在AP组下引用5G射频模板和2G射频模板

[AC1-wlan-ap-group-ap-group1]radio-5g-profile radio5g radio 1

[AC1-wlan-ap-group-ap-group1]radio-2g-profile radio2g radio 0

[AC1-wlan-view]calibrate enable manual  //配置射频调优模式为手动调优,并手动触发射频调优

[AC1-wlan-view]calibrate manual startup


版权声明:本文内容由网络用户投稿,版权归原作者所有,本站不拥有其著作权,亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容,请联系我们jiasou666@gmail.com 处理,核实后本网站将在24小时内删除侵权内容。

上一篇:Java 进阶使用 Lambda 表达式实现超强的排序功能
下一篇:如何查看ccie证书真假?(ccie证书查询)
相关文章

 发表评论

暂时没有评论,来抢沙发吧~