华为设备配置CAPWAP断链业务保持

华为设备配置CAPWAP断链业务保持

1. 配置LSW和AC，使AP和AC互通

[LSW1]vlan batch 10 20

[LSW1-GigabitEthernet0/0/1]port link-type trunk

[LSW1-GigabitEthernet0/0/1]port trunk pvid vlan 10

[LSW1-GigabitEthernet0/0/1]port trunk allow-pass vlan 10 20

[LSW1-GigabitEthernet0/0/1]port-isolate enable

[LSW1-GigabitEthernet0/0/2]port link-type trunk

[LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 10

[AC1]vlan batch 10 20

[AC1-GigabitEthernet0/0/1]port link-type trunk

[AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 10

2. 配置LSW的DHCP功能，为AP和STA分配IP地址

[LSW1-Vlanif10]ip add 10.1.1.1 24

[LSW1-Vlanif10]dhcp select interface

[LSW1-Vlanif10]dhcp server excluded-ip-address 10.1.1.2

[LSW1-Vlanif20]ip add 10.1.2.1 24

[LSW1-Vlanif20]dhcp select interface

3. 配置AP上线

[AC1]wlan

[AC1-wlan-view]ap-group name ap-group1  //创建AP组

[AC1-wlan-view]regulatory-domain-profile name domain1  //创建域管理模板

[AC1-wlan-regulate-domain-domain1]country-code cn

[AC1-wlan-view]ap-group name ap-group1

[AC1-wlan-ap-group-ap-group1]regulatory-domain-profile domain  //在AP组下引用域管理模板

[AC1-Vlanif10]ip add 10.1.1.2 24

[AC1]capwap source interface Vlanif 10  //配置AC的源接口

[AC1]wlan

[AC1-wlan-view]ap auth-mode mac-auth

[AC1-wlan-view]ap-id 0 ap-mac 00e0-fce1-3f40  //在AC上离线导入AP

[AC1-wlan-ap-0]ap-name AP1

[AC1-wlan-ap-0]ap-group ap-group1

4. 配置WLAN业务参数

[AC1-wlan-view]security-profile name wlan-security  //创建安全模板

[AC1-wlan-sec-prof-wlan-security]security wpa2 psk pass-phrase abc@1234 aes  //配置安全策略

[AC1-wlan-view]ssid-profile name wlan-ssid  //创建名为SSID模板

[AC1-wlan-ssid-prof-wlan-ssid]ssid wlan-net  //配置SSID名称

[AC1-wlan-view]ap-system-profile name wlan-system  //创建名AP系统模板

[AC1-wlan-ap-system-prof-wlan-system]keep-service enable  //配置CAPWAP断链业务保持功能

[AC1-wlan-view]vap-profile name wlan-vap  //创建VAP模板

[AC1-wlan-vap-prof-wlan-vap]forward-mode direct-forward   //配置业务数据转发模式

[AC1-wlan-vap-prof-wlan-vap]service-vlan vlan-id 20  //配置业务VLAN

[AC1-wlan-vap-prof-wlan-vap]security-profile wlan-security  //引用安全模板

[AC1-wlan-vap-prof-wlan-vap]ssid-profile wlan-ssid  //引用SSID模板

[AC1-wlan-view]ap-group name ap-group1

[AC1-wlan-ap-group-ap-group1]ap-system-profile wlan-system  //配置AP组引用AP系统模板

[AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio 0  //配置AP组引用VAP模板，AP上射频0和射频1都使用VAP模板“wlan-vap”的配置

[AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio 1

5. 验证配置

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。