华为设备配置信道切换业务不中断（华为设备配置信道切换业务不中断什么原因）

华为设备配置信道切换业务不中断（华为设备配置信道切换业务不中断什么原因）

1. 配置LSW1和AC1，使AP和AC1互：VLAN100用于管理VLAN，VLAN101用于业务VLAN

[LSW1]vlan batch 100 200

[LSW1-GigabitEthernet0/0/2]port link-type trunk

[LSW1-GigabitEthernet0/0/2]port trunk allow-pass vlan 100

[LSW1-GigabitEthernet0/0/3]port link-type trunk

[LSW1-GigabitEthernet0/0/3]port trunk allow-pass vlan 100 200

[LSW1-GigabitEthernet0/0/3]port trunk pvid vlan 100

[LSW1-GigabitEthernet0/0/3]port-isolate enable

[LSW1-GigabitEthernet0/0/4]port link-type trunk

[LSW1-GigabitEthernet0/0/4]port trunk pvid vlan 100

[LSW1-GigabitEthernet0/0/4]port trunk allow-pass vlan 100 200

[LSW1-GigabitEthernet0/0/4]port-isolate enable

[LSW1-GigabitEthernet0/0/1]port link-type access

[LSW1-GigabitEthernet0/0/1]port default vlan 200

[AC1]vlan batch 100 200

[AC1-GigabitEthernet0/0/1]port link-type trunk

[AC1-GigabitEthernet0/0/1]port trunk allow-pass vlan 100

2. 配置LSW1的DHCP功能，为AP和STA分配IP地址

[LSW1]dhcp enable

[LSW1]int Vlanif 100

[LSW1-Vlanif100]ip add 10.1.1.1 24

[LSW1-Vlanif100]dhcp select interface   //VLANIF100使用接口地址池为AP分配IP地址

[LSW1-Vlanif100]dhcp server excluded-ip-address 10.1.1.2

[LSW1]int Vlanif 200

[LSW1-Vlanif200]ip add 10.1.2.1 24

[LSW1-Vlanif200]dhcp select interface  //VLANIF200使用接口地址池为STA分配IP地址

[LSW1-Vlanif200]dhcp server excluded-ip-address 10.1.2.2

3. 配置AP上线

[AC1]wlan

[AC1-wlan-view]ap-group name ap-group1  //创建AP组，用于将相同配置的AP都加入同一AP组中

[AC1-wlan-view]regulatory-domain-profile name domain  //创建域管理模板

[AC1-wlan-regulate-domain-domain]country-code cn  //配置AC的国家码

[AC1-wlan-view]ap-group name ap-group1

[AC1-wlan-ap-group-ap-group1]regulatory-domain-profile domain  //在AP组下引用域管理模板

[AC1]int Vlanif 100

[AC1-Vlanif100]ip add 10.1.1.2 24

[AC1]capwap source interface Vlanif 100  //配置AC的源接口

[AC1]wlan

[AC1-wlan-view]ap auth-mode mac-auth

[AC1-wlan-view]ap-id 0 ap-mac 00e0-fcb1-4700  //在AC上离线导入AP

[AC1-wlan-ap-0]ap-name ap1

[AC1-wlan-ap-0]ap-group ap-group1

[AC1-wlan-view]ap-id 1 ap-mac 00e0-fc20-4430

[AC1-wlan-ap-1]ap-name ap2

[AC1-wlan-ap-1]ap-group ap-group1

4. 配置WLAN业务参数

[AC1-wlan-view]security-profile name wlan-security  //创建安全模板

[AC1-wlan-sec-prof-wlan-security]security wpa2 psk pass-phrase abc@1234 aes  //配置安全策略

[AC1-wlan-view]ssid-profile name wlan-ssid  //创建SSID模板

[AC1-wlan-ssid-prof-wlan-ssid]ssid wlan-net  //配置SSID名称

[AC1-wlan-view]radio-2g-profile name wlan-2g  //创建2G射频模板

[AC1-wlan-radio-2g-prof-wlan-2g]undo channel-switch announcement disable

[AC1-wlan-radio-2g-prof-wlan-2g]channel-switch mode continue-transmitting   /配置信道切换业务不中断

[AC1-wlan-view]radio-5g-profile name wlan-5g

[AC1-wlan-radio-5g-prof-wlan-5g]undo channel-switch announcement disable

[AC1-wlan-radio-5g-prof-wlan-5g]channel-switch mode continue-transmitting

[AC1-wlan-view]vap-profile name wlan-vap  // 创建VAP模板

[AC1-wlan-vap-prof-wlan-vap]forward-mode direct-forward   //配置业务数据转发模式

[AC1-wlan-vap-prof-wlan-vap]service-vlan vlan-id 200  //配置业务VLAN

[AC1-wlan-vap-prof-wlan-vap]security-profile wlan-security  //引用安全模板

[AC1-wlan-vap-prof-wlan-vap]ssid-profile wlan-ssid  //引用SSID模板

[AC1-wlan-view]ap-group name ap-group1

[AC1-wlan-ap-group-ap-group1]radio-2g-profile wlan-2g radio all   //配置AP组引用2G射频模板

[AC1-wlan-ap-group-ap-group1]radio-5g-profile wlan-5g radio all  //配置AP组引用5G射频模板

[AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio 0  //配置AP组引用VAP模板，AP上射频0使用VAP模板的配置

[AC1-wlan-ap-group-ap-group1]vap-profile wlan-vap wlan 1 radio 1  //配置AP组引用VAP模板，AP上射频1使用VAP模板的配置

5. 验证配置

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。