H3C irf 双线堆叠（h3c认证网络工程师证书）

H3C irf 双线堆叠（h3c认证网络工程师证书）

SWA配置;

[SWA]irf member 1 priority 10 #设置优先级10，越大越优先成为主[SWA]interface range Ten-GigabitEthernet 1/0/51 to Ten-GigabitEthernet 1/0/52[SWA-if-range]shutdown #关闭物理端口才可以和逻辑口绑定[SWA-if-range]quit[SWA]irf-port 1/1[SWA-irf-port1/1]port group interface Ten-GigabitEthernet 1/0/51You must perform the following tasks for a successful IRF setup:Save the configuration after completing IRF configuration.Execute the “irf-port-configuration active” command to activate the IRF ports.[SWA-irf-port1/1]quit[SWA]irf-port 1/2[SWA-irf-port1/2]port group interface Ten-GigabitEthernet 1/0/52You must perform the following tasks for a successful IRF setup:Save the configuration after completing IRF configuration.Execute the “irf-port-configuration active” command to activate the IRF ports.[SWA-irf-port1/2]quit[SWA]interface range Ten-GigabitEthernet 1/0/51 to Ten-GigabitEthernet 1/0/52[SWA-if-range]undo shutdown[SWA]irf-port-configuration active #激活IRF配置参数[SWA]save #保存，使得下次重启配置生效SWB配置：[SWB]irf member 1 priority 5[SWB]irf member 1 renumber 2 #修改成员ID[SWB]savereboot #需要重启一次Start to check configuration with next startup configuration file, please wait…DONE!This command will reboot the device. Continue? [Y/N]:y[SWB]interface range Ten-GigabitEthernet 2/0/51 to Ten-GigabitEthernet 2/0/52[SWB-if-range]shutdown[SWB-if-range]quit[SWB]irf-port 2/1[SWB-irf-port2/1]port group interface Ten-GigabitEthernet 2/0/51You must perform the following tasks for a successful IRF setup:Save the configuration after completing IRF configuration.Execute the “irf-port-configuration active” command to activate the IRF ports.[SWB-irf-port2/1]quit[SWB]irf-port 2/2[SWB-irf-port2/2]port group interface Ten-GigabitEthernet 2/0/52You must perform the following tasks for a successful IRF setup:Save the configuration after completing IRF configuration.Execute the “irf-port-configuration active” command to activate the IRF ports.[SWB-irf-port2/2]quit[SWB]interface range Ten-GigabitEthernet 2/0/51 to Ten-GigabitEthernet 2/0/52[SWB-if-range]undo shutdown[SWB-if-range]quit[SWB]irf-port-configuration activesave然后将万兆光纤线缆如上图51和51口交叉互联，等待8分钟备机自动重启后就完成了IRF。[SWA]display irfMemberID Role Priority CPU-Mac Description*+1 Master 10 6e2b-a938-0104 —2 Standby 5 6e2b-ac96-0204 —

indicates the device is the master.

+ indicates the device through which the user logs in.The bridge MAC of the IRF is: 6e2b-a938-0100Auto upgrade : yesMac persistent : 6 minDomain ID : 0<

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。