华为配置Eth-Trunk接口流量本地优先转发（华为ethtrunk配置）

华为配置Eth-Trunk接口流量本地优先转发（华为ethtrunk配置）

1. 创建Eth-Trunk接口

[Stack]int Eth-Trunk 1

[Stack-Eth-Trunk1]port link-type trunk

[Stack-Eth-Trunk1]port trunk allow-pass vlan all

[LSW3]interface Eth-Trunk 1

[LSW3-Eth-Trunk1]port link-type trunk

[LSW3-Eth-Trunk1]port trunk allow-pass vlan all

2. 加入Eth-Trunk的成员接口

[Stack-GigabitEthernet0/0/1]eth-trunk 1

[Stack-GigabitEthernet0/0/3]eth-trunk 1

[LSW3]interface Eth-Trunk 1

[LSW3-Eth-Trunk1]trunkport GigabitEthernet 0/0/1 to 0/0/2

3. 使能Eth-Trunk接口流量本地优先转发功能

[Stack-Eth-Trunk1]local-preference enable

4. 配置各接口加入相应VLAN，实现二层互通

[Stack-GigabitEthernet0/0/4]port link-type trunk

[Stack-GigabitEthernet0/0/4]port trunk allow-pass vlan 10

[Stack-GigabitEthernet0/0/5]port link-type trunk

[Stack-GigabitEthernet0/0/5]port trunk allow-pass vlan 20

[LSW4-GigabitEthernet0/0/1]port link-type trunk

[LSW4-GigabitEthernet0/0/1]port trunk allow-pass vlan 10

[LSW4-GigabitEthernet0/0/2]port link-type access

[LSW4-GigabitEthernet0/0/2]port default vlan 10

[LSW5]vlan 20

[LSW5-GigabitEthernet0/0/5]port link-type trunk

[LSW5-GigabitEthernet0/0/5]port trunk allow-pass vlan 20

[LSW5-GigabitEthernet0/0/1]port link-type access

[LSW5-GigabitEthernet0/0/1]port default vlan 20

5.验证

[Stack]display trunkmembership eth-trunk 1

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。