CCNP(BSCI)实验：OSPFv3实验

CCNP(BSCI)实验：OSPFv3实验

R2(config)#int lo0R2(config-if)#ipv add 2::1/64R2(config-if)#int s2/1R2(config-if)#ipv add 2001::2/64R2(config-if)#no sh

第二步：配置ospfv3R1(config)#int s2/1R1(config-if)#ipv os 1 a 0R1(config-if)#int lo0R1(config-if)#ipv os 1 a 0R1(config-if)#exiR1(config)#ipv router os 1R1(config-rtr)#rouR1(config-rtr)#router-id 1.1.1.1

R2(config)#int lo0R2(config-if)#ipv os 1 a 0R2(config-if)#int s2/1R2(config-if)#ipv os 1 a 0R2(config-if)#ipv router os 1R2(config-rtr)#router-id 2.2.2.2

第三步：调试R1#sh ipv6 ospf neighbor

Neighbor ID Pri State Dead Time Interface ID Interface2.2.2.2 1 FULL/ - 00:00:36 4 Serial2/1

R1#sh ipv6 ospf database

OSPFv3 Router with ID (1.1.1.1) (Process ID 1)

Router Link States (Area 0)

ADV Router Age Seq# Fragment ID Link count Bits1.1.1.1 81 0x80000003 0 1 None2.2.2.2 82 0x80000001 0 1 None

Link (Type-8) Link States (Area 0)

ADV Router Age Seq# Link ID Interface1.1.1.1 140 0x80000001 6 Se2/12.2.2.2 82 0x80000001 4 Se2/1

Intra Area Prefix Link States (Area 0)

ADV Router Age Seq# Link ID Ref-lstype Ref-LSID1.1.1.1 131 0x80000002 0 0x2001 02.2.2.2 82 0x80000001 0 0x2001 0

R1#sh ipv6 routeIPv6 Routing Table - 7 entriesCodes: C - Connected, L - Local, S - Static, R - RIP, B - BGPU - Per-user Static routeI1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summaryO - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2C 1::/64 [0/0]via ::, Loopback0L 1::1/128 [0/0]via ::, Loopback0O 2::1/128 [110/64]via FE80::C892:FFF:FEAC:0, Serial2/1C 2001::/64 [0/0]via ::, Serial2/1L 2001::1/128 [0/0]via ::, Serial2/1L FE80::/10 [0/0]via ::, Null0L FF00::/8 [0/0]via ::, Null0

第四步：测试R1#ping 2::1 so lo 0

Type escape sequence to abort.Sending 5, 100-byte ICMP Echos to 2::1, timeout is 2 seconds:!!!!!Success rate is 100 percent (5/5), round-trip min/avg/max = 28/30/32 ms

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。