CCNA实验：配置TRUNK中继(VTP协议)

CCNA实验：配置TRUNK中继(VTP协议)

第四步：查看sw2的vlan信息S2#sh vlan-s

VLAN Name Status Ports

1 default active Fa0/0, Fa0/1, Fa0/2, Fa0/3Fa0/4, Fa0/5, Fa0/6, Fa0/7Fa0/8, Fa0/9, Fa0/10, Fa0/12Fa0/13, Fa0/14, Fa0/151002 fddi-default active 1003 token-ring-default active 1004 fddinet-default active 1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

1 enet 100001 1500 - - - - - 1002 10031002 fddi 101002 1500 - - - - - 1 10031003 tr 101003 1500 1005 0 - - srb 1 10021004 fdnet 101004 1500 - - 1 ibm - 0 0 1005 trnet 101005 1500 - - 1 ibm - 0 0 S2#

第五步：配置sw1的Vtp协议S1#vlan daS1(vlan)#vtp domain Bob （配置vrp 域名为Bob）Changing VTP domain name from NULL to BobS1(vlan)#vtp server （设置Vtp为server端）Device mode already VTP SERVER.S1(vlan)#exitAPPLY completed.Exiting....S1#第六步：配置sw2的Vtp协议S2(vlan)#vtp domain BobChanging VTP domain name from Bov to BobS2(vlan)#vtp clientSetting device to VTP CLIENT mode.S2(vlan)#exitIn CLIENT state, no apply attempted.Exiting....S2#第七步：现在立即查看sw2上的vlan信息S2#sh vlan-s

VLAN Name Status Ports

1 default active Fa0/0, Fa0/1, Fa0/2, Fa0/3Fa0/4, Fa0/5, Fa0/6, Fa0/7Fa0/8, Fa0/9, Fa0/10, Fa0/12Fa0/13, Fa0/14, Fa0/152 Bob active 1002 fddi-default active 1003 token-ring-default active 1004 fddinet-default active 1005 trnet-default active

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2

1 enet 100001 1500 - - - - - 1002 10032 enet 100002 1500 - - - - - 0 0 1002 fddi 101002 1500 - 0 - - - 1 10031003 tr 101003 1500 1005 0 - - srb 1 10021004 fdnet 101004 1500 - - 1 ibm - 0 0 1005 trnet 101005 1500 - - 1 ibm - 0 0 S2#

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。