华为eNSP配置静态路由配置实验（ensp中静态路由配置）

华为eNSP配置静态路由配置实验（ensp中静态路由配置）

拓扑图如下：

（1）R1的配置

sys Enter system view, return user view with Ctrl+Z. [Huawei]sysname R1 Oct 22 2019 17:37:56-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 1, the ch ange loop count is 0, and the maximum number of records is 4095. [R1]int g0/0/0 [R1-GigabitEthernet0/0/0]ip add 12.0.0.1 24 Oct 22 2019 17:38:21-08:00 R1 %%01IFNET/4/LINK_STATE(l)[2]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [R1-GigabitEthernet0/0/0]un sh Info: Interface GigabitEthernet0/0/0 is not shutdown. [R1-GigabitEthernet0/0/0] Oct 22 2019 17:38:26-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 2, the ch ange loop count is 0, and the maximum number of records is 4095. [R1-GigabitEthernet0/0/0]int g0/0/1 [R1-GigabitEthernet0/0/1]ip add 13.0.0.1 24 Oct 22 2019 17:38:48-08:00 R1 %%01IFNET/4/LINK_STATE(l)[3]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. [R1-GigabitEthernet0/0/1]un sh Info: Interface GigabitEthernet0/0/1 is not shutdown. [R1-GigabitEthernet0/0/1] Oct 22 2019 17:38:56-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 3, the ch ange loop count is 0, and the maximum number of records is 4095. [R1-GigabitEthernet0/0/1]int loo 0 Oct 22 2019 17:39:06-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 4, the ch ange loop count is 0, and the maximum number of records is 4095. [R1-LoopBack0]ip add 1.1.1.1 32 [R1-LoopBack0]q Oct 22 2019 17:39:26-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 5, the ch ange loop count is 0, and the maximum number of records is 4095. [R1]dis ip int b *down: administratively down !down: FIB overload down ^down: standby (l): loopback (s): spoofing (d): Dampening Suppressed The number of interface that is UP in Physical is 4 The number of interface that is DOWN in Physical is 8 The number of interface that is UP in Protocol is 4 The number of interface that is DOWN in Protocol is 8 Interface IP Address/Mask Physical Protocol Ethernet0/0/0 unassigned down down Ethernet0/0/1 unassigned down down GigabitEthernet0/0/0 12.0.0.1/24 up up GigabitEthernet0/0/1 13.0.0.1/24 up up GigabitEthernet0/0/2 unassigned down down GigabitEthernet0/0/3 unassigned down down LoopBack0 1.1.1.1/32 up up(s) NULL0 unassigned up up(s) Serial0/0/0 unassigned down down Serial0/0/1 unassigned down down Serial0/0/2 unassigned down down Serial0/0/3 unassigned down down [R1] User interface con0 is availabl [R1]ip route-static 3.3.3.3 32 13.0.0.3 [R1]ip route-static 3.3.3.3 32 12.0.0.2 [R1]ip route-static 2.2.2.2 32 13.0.0.3 [R1]ip route-static 2.2.2.2 32 12.0.0.2 [R1]ip route-static 23.0.0.0 24 13.0.0.3 [R1]ip route-static 23.0.0.0 24 12.0.0.2 [R1] Oct 22 2019 18:32:59-08:00 R1 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 11, the c hange loop count is 0, and the maximum number of records is 4095. [R1] User interface con0 is available [R1]dis ip routing-table Route Flags: R - relay, D - download to fib ------------------------------------------------------------------------------ Routing Tables: Public Destinations : 10 Routes : 13 Destination/Mask Proto Pre Cost Flags NextHop Interface 1.1.1.1/32 Direct 0 0 D 127.0.0.1 LoopBack0 2.2.2.2/32 Static 60 0 RD 13.0.0.3 GigabitEthernet 0/0/1 Static 60 0 RD 12.0.0.2 GigabitEthernet 0/0/0 3.3.3.3/32 Static 60 0 RD 13.0.0.3 GigabitEthernet 0/0/1 Static 60 0 RD 12.0.0.2 GigabitEthernet 0/0/0 12.0.0.0/24 Direct 0 0 D 12.0.0.1 GigabitEthernet 0/0/0 12.0.0.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/0 13.0.0.0/24 Direct 0 0 D 13.0.0.1 GigabitEthernet 0/0/1 13.0.0.1/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/1 23.0.0.0/24 Static 60 0 RD 13.0.0.3 GigabitEthernet 0/0/1 Static 60 0 RD 12.0.0.2 GigabitEthernet 0/0/0 127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0 127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0 [R1]

（2）R2的配置

sys Enter system view, return user view with Ctrl+Z. [Huawei]sys [Huawei]sysname R2 [R2] [R2]int g Oct 22 2019 17:39:56-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 1, the ch ange loop count is 0, and the maximum number of records is [R2]int g0/0/0 [R2-GigabitEthernet0/0/0]ip add 12.0.0.2 24 [R2-GigabitEthernet0/0/0] Oct 22 2019 17:40:32-08:00 R2 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/0 has entered the UP state. [R2-GigabitEthernet0/0/0]un sh Info: Interface GigabitEthernet0/0/0 is not shutdown. [R2-GigabitEthernet0/0/0] Oct 22 2019 17:40:36-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 2, the ch ange loop count is 0, and the maximum number of records is 4095. [R2-GigabitEthernet0/0/0]int g0/0/2 [R2-GigabitEthernet0/0/2]ip add 23.0.0.2 24 [R2-GigabitEthernet0/0/2] Oct 22 2019 17:40:54-08:00 R2 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/2 has entered the UP state. [R2-GigabitEthernet0/0/2]u Oct 22 2019 17:40:56-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 3, the ch ange loop count is 0, and the maximum number of records is 4095.n sh Info: Interface GigabitEthernet0/0/2 is not shutdown. [R2-GigabitEthernet0/0/2] [R2-GigabitEthernet0/0/2]int loo 0 [R2-LoopBack0]ip Oct 22 2019 17:41:06-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 4, the ch ange loop count is 0, and the maximum number of records is 4095. ^ Error:Incomplete command found at '^' position. [R2-LoopBack0]ip add 2.2.2.2 32 [R2-LoopBack0]q [R2]dis ip int b *down: administratively down !down: FIB overload down ^down: standby (l): loopback (s): spoofing (d): Dampening Suppressed The number of interface that is UP in Physical is 4 The number of interface that is DOWN in Physical is 8 The number of interface that is UP in Protocol is 4 The number of interface that is DOWN in Protocol is 8 Interface IP Address/Mask Physical Protocol Ethernet0/0/0 unassigned down down Ethernet0/0/1 unassigned down down GigabitEthernet0/0/0 12.0.0.2/24 up up GigabitEthernet0/0/1 unassigned down down GigabitEthernet0/0/2 23.0.0.2/24 up up GigabitEthernet0/0/3 unassigned down down LoopBack0 2.2.2.2/32 up up(s) NULL0 unassigned up up(s) Serial0/0/0 unassigned down down Serial0/0/1 unassigned down down Serial0/0/2 unassigned down down Serial0/0/3 unassigned down down [R2] Oct 22 2019 17:41:26-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 5, the ch ange loop count is 0, and the maximum number of records is 4095. [R2] [R2]ip route-static 1.1.1.1 32 12.0.0.1 [R2]ip route-static 1.1.1.1 32 23.0.0.3 [R2]ip route-static 3.3.3.3 32 12.0.0.1 [R2]ip route-static 3.3.3.3 32 23.0.0.3 [R2]ip route-static 13.0.0.0 24 23.0.0.3 [R2]ip route-static 13.0.0.0 24 12.0.0.1 [R2] Oct 22 2019 18:33:18-08:00 R2 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 11, the c hange loop count is 0, and the maximum number of records is 4095. [R2] [R2] User interface con0 is available [R2]dis ip routing-table Route Flags: R - relay, D - download to fib ------------------------------------------------------------------------------ Routing Tables: Public Destinations : 10 Routes : 13 Destination/Mask Proto Pre Cost Flags NextHop Interface 1.1.1.1/32 Static 60 0 RD 12.0.0.1 GigabitEthernet 0/0/0 Static 60 0 RD 23.0.0.3 GigabitEthernet 0/0/2 2.2.2.2/32 Direct 0 0 D 127.0.0.1 LoopBack0 3.3.3.3/32 Static 60 0 RD 12.0.0.1 GigabitEthernet 0/0/0 Static 60 0 RD 23.0.0.3 GigabitEthernet 0/0/2 12.0.0.0/24 Direct 0 0 D 12.0.0.2 GigabitEthernet 0/0/0 12.0.0.2/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/0 13.0.0.0/24 Static 60 0 RD 23.0.0.3 GigabitEthernet 0/0/2 Static 60 0 RD 12.0.0.1 GigabitEthernet 0/0/0 23.0.0.0/24 Direct 0 0 D 23.0.0.2 GigabitEthernet 0/0/2 23.0.0.2/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/2 127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0 127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0 [R2]

（3）R3的配置

sys Enter system view, return user view with Ctrl+Z. [R3]int g0/0/1 [R3-GigabitEthernet0/0/1]ip add 13.0.0.3 24 [R3-GigabitEthernet0/0/1] Oct 22 2019 18:31:33-08:00 R3 %%01IFNET/4/LINK_STATE(l)[0]:The line protocol IP on the interface GigabitEthernet0/0/1 has entered the UP state. [R3-GigabitEthernet0/0/1]un sh Info: Interface GigabitEthernet0/0/1 is not shutdown. [R3-GigabitEthernet0/0/1] [R3-GigabitEthernet0/0/1] Oct 22 2019 18:31:39-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 2, the ch ange loop count is 0, and the maximum number of records is 4095. [R3-GigabitEthernet0/0/1]int g0/0/2 [R3-GigabitEthernet0/0/2]ip add 23.0.0.3 24 [R3-GigabitEthernet0/0/2] Oct 22 2019 18:31:55-08:00 R3 %%01IFNET/4/LINK_STATE(l)[1]:The line protocol IP on the interface GigabitEthernet0/0/2 has entered the UP state. Oct 22 2019 18:31:59-08:00 R3 DS/4/DATASYNC_CFGCHANGE:OID 1.3.6.1.4.1.2011.5.25. 191.3.1 configurations have been changed. The current change number is 3, the ch ange loop count is 0, and the maximum number of records is 4095. [R3-GigabitEthernet0/0/2]un sh Info: Interface GigabitEthernet0/0/2 is not shutdown. [R3-GigabitEthernet0/0/2] [R3-GigabitEthernet0/0/2] [R3-GigabitEthernet0/0/2]q [R3]dis ip int b *down: administratively down !down: FIB overload down ^down: standby (l): loopback (s): spoofing (d): Dampening Suppressed The number of interface that is UP in Physical is 3 The number of interface that is DOWN in Physical is 8 The number of interface that is UP in Protocol is 3 The number of interface that is DOWN in Protocol is 8 Interface IP Address/Mask Physical Protocol Ethernet0/0/0 unassigned down down Ethernet0/0/1 unassigned down down GigabitEthernet0/0/0 unassigned down down GigabitEthernet0/0/1 13.0.0.3/24 up up GigabitEthernet0/0/2 23.0.0.3/24 up up GigabitEthernet0/0/3 unassigned down down NULL0 unassigned up up(s) Serial0/0/0 unassigned down down Serial0/0/1 unassigned down down Serial0/0/2 unassigned down down Serial0/0/3 unassigned down down [R3] [R3]ip route-static 1.1.1.1 32 13.0.0.1 [R3]ip route-static 1.1.1.1 32 23.0.0.2 [R3]ip route-static 2.2.2.2 32 13.0.0.1 [R3]ip route-static 2.2.2.2 32 23.0.0.2 [R3]ip route-static 12.0.0.0 24 23.0.0.2 [R3]ip route-static 12.0.0.0 24 13.0.0.1 [R3]dis ip routing-table Route Flags: R - relay, D - download to fib ------------------------------------------------------------------------------ Routing Tables: Public Destinations : 9 Routes : 12 Destination/Mask Proto Pre Cost Flags NextHop Interface 1.1.1.1/32 Static 60 0 RD 13.0.0.1 GigabitEthernet 0/0/1 Static 60 0 RD 23.0.0.2 GigabitEthernet 0/0/2 2.2.2.2/32 Static 60 0 RD 13.0.0.1 GigabitEthernet 0/0/1 Static 60 0 RD 23.0.0.2 GigabitEthernet 0/0/2 12.0.0.0/24 Static 60 0 RD 23.0.0.2 GigabitEthernet 0/0/2 Static 60 0 RD 13.0.0.1 GigabitEthernet 0/0/1 13.0.0.0/24 Direct 0 0 D 13.0.0.3 GigabitEthernet 0/0/1 13.0.0.3/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/1 23.0.0.0/24 Direct 0 0 D 23.0.0.3 GigabitEthernet 0/0/2 23.0.0.3/32 Direct 0 0 D 127.0.0.1 GigabitEthernet 0/0/2 127.0.0.0/8 Direct 0 0 D 127.0.0.1 InLoopBack0 127.0.0.1/32 Direct 0 0 D 127.0.0.1 InLoopBack0 [R3]

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。