Cisco 路由器上传IOS(二)(cisco路由器设置)

网友投稿 348 2022-09-27


Cisco 路由器上传IOS(二)(cisco路由器设置)

如果工作中不慎误删路由器IOS,或者升级了错误版本IOS,导致路由器不能正常启动,可以通过TFTP恢复IOS,还可以采用Xmodem方式通过console口恢复IOS。然而由于Console接口速率很慢,很少有人会采用。

IP_ADDRESS: 10.8.3.1 IP_SUBNET_MASK: 255.255.255.0 DEFAULT_GATEWAY: 10.8.3.134 TFTP_SERVER: 10.8.3.134 TFTP_FILE: c1841-adventerprisek9-mz.151-3.T2.bin TFTP_MACADDR: 00:1f:6c:eb:a1:a8 TFTP_VERBOSE: Progress TFTP_RETRY_COUNT: 18 TFTP_TIMEOUT: 7200 TFTP_CHECKSUM: Yes FE_PORT: 0 FE_SPEED_MODE: Auto Detect

Invoke this command for disaster recovery only.WARNING: all existing data in all partitions on flash: will be lost!Do you wish to continue? y/n: [n]: yReceiving c1841-adventerprisek9-mz.151-3.T2.bin from 10.8.3.134 !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

File reception completed.Validating checksum.Copying file c1841-adventerprisek9-mz.151-3.T2.bin to flash:.program load complete, entry point: 0x8000f000, size: 0xcb80

Format: Drive communication & 1st Sector Write OK...Writing Monlib sectors........................................................................................................Monlib write complete

Format: All system sectors written. OK...Format: Operation completed successfully.


版权声明:本文内容由网络用户投稿,版权归原作者所有,本站不拥有其著作权,亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容,请联系我们jiasou666@gmail.com 处理,核实后本网站将在24小时内删除侵权内容。

上一篇:SpringBoot之Order注解启动顺序说明
下一篇:Java实现和电脑玩剪刀石头布游戏
相关文章

 发表评论

暂时没有评论,来抢沙发吧~