Cisco ISE初始化设置（cisco anyconnect）

Cisco ISE初始化设置（cisco anyconnect）

目录：1. 初始配置

2. 初始ISE状态检查

3. 网页和SSH登陆

ISE在ESXI上安装时，推荐使用redhat linux 64位。硬盘200G，内存10G，CPU 2核。 越多越好1.初始配置

Booting OS, please wait ...

Press to continue

**********************************************

Please type 'setup' to configure the appliance

**********************************************

localhost login: setup

Press 'Ctrl-C' to abort setup

Enter hostname[]: ISE

Enter IP address[]: 172.16.201.200

Enter IP netmask[]: 255.255.255.0

Enter IP default gateway[]: 172.16.201.254

Enter default DNS domain[]: LEAD

Enter primary nameserver[]: 202.96.209.133

Add secondary nameserver? Y/N [N]: N

Enter NTP server[time.nist.gov]: time.nist.gov

Add another NTP server? Y/N [N]: N

Enter system timezone[UTC]:    UTC

Enable SSH service? Y/N [N]: Y

Enter username[admin]: admin

Enter password:

Enter password again:

Copying first CLI user to be first ISE admin GUI user...

Bringing up network interface...

Pinging the gateway...

Pinging the primary nameserver...

Do not use 'Ctrl-C' from this point on...

Installing Applications...

=== Initial Setup for Application: ISE ===

Welcome to the ISE initial setup.  The purpose of this setup is to

provision the internal ISE database.  This setup is non-interactive,

and will take roughly 5 minutes to complete.

Running database cloning script...

Running database network config assistant tool...

Extracting ISE database content...

Starting ISE database processes...

Creating ISE M&T session directory...

Performing ISE database priming...

Generating configuration...

Rebooting...

Broadcast message from root@ISE

(unknown) at 1:55 ...

The system is going down for reboot NOW!

ooting OS, please wait ...

Press to continue

ISE login: admin

Password:

Failed to log in 0 time(s)

ISE/admin#

2.初始ISE状态检查（红色标记确认为running，特别是application server状态）

ISE/admin# show application status ise

ISE PROCESS NAME                       STATE            PROCESS ID

--------------------------------------------------------------------

Database Listener                      running          4156

Database Server                        running          41 PROCESSES

Application Server                     running          6639

Profiler Database                      running          4965

AD Connector                           running          7052

M&T Session Database                   running          2607

M&T Log Collector                      running          6942

M&T Log Processor                      running          6888

Certificate Authority Service          running          6829

SXP Engine Service                     disabled

pxGrid Infrastructure Service          disabled

pxGrid Publisher Subscriber Service    disabled

pxGrid Connection Manager              disabled

pxGrid Controller                      disabled

Identity Mapping Service               disabled

3. 网页和SSH登陆

SSH登陆：（首次登陆需要改密码，SSH和网页账号名相同，密码初始相同，初始ssh登陆时要改为不通的密码）

You are required to change your password immediately (password aged)

Last login: Thu May  7 02:20:17 2020 from 172.16.200.46

WARNING: Your password has expired.

You must change your password now and login again!

Changing password for user admin.

Changing password for admin.

(current) UNIX password:

New password:

Retype new password:

passwd: all authentication tokens updated successfully.

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。