juniper bgp 配置

juniper bgp 配置

1.EBGP配置

set  protocols bgp group ebgptest type external

set  protocols bgp group ebgptest local-address x.x.x.x

set  protocols bgp group ebgptest neighbor  x.x.x.x multihop ttl 2

set  protocols bgp group ebgptest neighbor x.x.x.x peer-as 64430

set  routing-options autonomous-system 65530

set routing-options router-id x.x.x.x

2.IBGP配置

set  protocols bgp group ibgptest type internal

set  protocols bgp group ibgptest local-address x.x.x.x

set  protocols bgp group ibgptest neighbor x.x.x.x

set  routing-options autonomous-system 65530

set routing-options router-id x.x.x.x

如下命令把静态路由或动态路由导入到BGP路由中

set  protocols bgp group ibgptest export static-to-bgp

set  policy-options policy-statement static-to-bgp term 1 from protocol static

set  policy-options policy-statement static-to-bgp term 1 from protocol ospf

set  policy-options policy-statement static-to-bgp term 1 then accept

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。