内网无路由跨网络服务——单网卡双IP配置

内网无路由跨网络服务——单网卡双IP配置

有些时候，在我们内网服务中，如果不想使用路由功能，又想让某些服务器能够跨网络服务，那么此时，就需要在服务器网卡上配置多个IP地址，让它能够提供多个网络的访问，那么在linux下该如何实现了，今天就给大家分享一下。

操作步骤

1、cp eth0 eth0:1将网卡接口配置文件复制一份命名为eth0:1

2、修改网卡的具体配置信息

注意：eth0可以用DHCP，可以静态配置

eth0:1只能用静态配置

既然我们是服务器，当然两个配置都使用静态IP最好了

3、重启网络服务（确保NetworkManager服务处于停止状态）

4、验证最终效果

第一步：cp eth0 eth0:1将网卡接口配置文件复制一份命名为eth0:1

[root@Centos6 network-scripts]# cp ifcfg-eth0 ifcfg-eth0:1

第二步：修改网卡的具体配置信息

[root@Centos6 network-scripts]# vim ifcfg-eth0

[root@Centos6 network-scripts]# cat ifcfg-eth0

DEVICE=eth0

BOOTPROTO=none

IPADDR=10.1.253.253

PREFIX=16

[root@Centos6 network-scripts]# cat ifcfg-eth0:1

DEVICE=eth0：1

BOOTPROTO=none

IPADDR=192.168.253.253

PREFIX=24

[root@Centos6 network-scripts]#

第三步：重启网络服务（确保NetworkManager服务处于停止状态）

注意系统默认会开启NetworkManager服务，要想启用单网卡双IP，最好先关闭，否则会不生效

[root@Centos6 network-scripts]# service NetworkManager status

NetworkManager is stopped

[root@Centos6 network-scripts]# service network restart

Shutting down interface eth0:                              [  OK  ]

Shutting down loopback interface:                          [  OK  ]

Bringing up loopback interface:                            [  OK  ]

Bringing up interface eth0:  Determining if ip address 10.1.253.253 is already in use for device eth0...

Determining if ip address 192.168.253.253 is already in use for device eth0...

[  OK  ]

[root@Centos6 network-scripts]# ifconfig

eth0      Link encap:Ethernet  HWaddr 00:0C:29:C8:72:26

inet addr:10.1.253.253  Bcast:10.1.255.255  Mask:255.255.0.0

inet6 addr: fe80::20c:29ff:fec8:7226/64 Scope:Link

UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

RX packets:1185 errors:0 dropped:0 overruns:0 frame:0

TX packets:366 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:1000

RX bytes:107195 (104.6 KiB)  TX bytes:38655 (37.7 KiB)

eth0:1    Link encap:Ethernet  HWaddr 00:0C:29:C8:72:26

inet addr:192.168.253.253  Bcast:192.168.253.255  Mask:255.255.255.0

UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1

lo        Link encap:Local Loopback

inet addr:127.0.0.1  Mask:255.0.0.0

inet6 addr: ::1/128 Scope:Host

UP LOOPBACK RUNNING  MTU:65536  Metric:1

RX packets:260 errors:0 dropped:0 overruns:0 frame:0

TX packets:260 errors:0 dropped:0 overruns:0 carrier:0

collisions:0 txqueuelen:0

RX bytes:18160 (17.7 KiB)  TX bytes:18160 (17.7 KiB)

[root@Centos6 network-scripts]#

第四步：验证最终效果，从Centos7去pingCentos6上配置的双IP

[root@centos7 network-scripts]# ifconfig

eno16777728: flags=4163  mtu 1500

inet 10.1.254.254  netmask 255.255.0.0  broadcast 10.1.255.255

inet6 fe80::20c:29ff:fe06:f987  prefixlen 64  scopeid 0x20

ether 00:0c:29:06:f9:87  txqueuelen 1000  (Ethernet)

RX packets 133425  bytes 10462696 (9.9 MiB)

RX errors 0  dropped 0  overruns 0  frame 0

TX packets 61400  bytes 6585145 (6.2 MiB)

TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

eno16777728:1: flags=4163  mtu 1500

inet 192.168.253.254  netmask 255.255.255.0  broadcast 192.168.253.255

ether 00:0c:29:06:f9:87  txqueuelen 1000  (Ethernet)

lo: flags=73  mtu 65536

inet 127.0.0.1  netmask 255.0.0.0

inet6 ::1  prefixlen 128  scopeid 0x10

loop  txqueuelen 0  (Local Loopback)

RX packets 2496  bytes 234576 (229.0 KiB)

RX errors 0  dropped 0  overruns 0  frame 0

TX packets 2496  bytes 234576 (229.0 KiB)

TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@centos7 network-scripts]# ping -c 4 10.1.253.253

PING 10.1.253.253 (10.1.253.253) 56(84) bytes of data.

64 bytes from 10.1.253.253: icmp_seq=1 ttl=64 time=3.41 ms

64 bytes from 10.1.253.253: icmp_seq=2 ttl=64 time=0.536 ms

64 bytes from 10.1.253.253: icmp_seq=3 ttl=64 time=0.539 ms

64 bytes from 10.1.253.253: icmp_seq=4 ttl=64 time=0.738 ms

--- 10.1.253.253 ping statistics ---

4 packets transmitted, 4 received, 0% packet loss, time 3029ms

rtt min/avg/max/mdev = 0.536/1.306/3.413/1.219 ms

[root@centos7 network-scripts]# ping -c 4 192.168.253.254

PING 192.168.253.254 (192.168.253.254) 56(84) bytes of data.

64 bytes from 192.168.253.254: icmp_seq=1 ttl=64 time=0.135 ms

64 bytes from 192.168.253.254: icmp_seq=2 ttl=64 time=0.126 ms

64 bytes from 192.168.253.254: icmp_seq=3 ttl=64 time=0.126 ms

64 bytes from 192.168.253.254: icmp_seq=4 ttl=64 time=0.128 ms

--- 192.168.253.254 ping statistics ---

4 packets transmitted, 4 received, 0% packet loss, time 3017ms

rtt min/avg/max/mdev = 0.126/0.128/0.135/0.014 ms

[root@centos7 network-scripts]#

可以看出，两个IP地址都可以ping通，所以如果是跨网络服务时，单网卡双IP的功效就体现出来了。

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。