ELK logstash配置示例

ELK logstash配置示例

Logstash Configuration Examples

The following examples illustrate how you can configure Logstash to filter events, process Apache logs and syslog messages, and use conditionals to control what events are processed by a filter or output.

以下示例说明了如何配置Logstash来过滤事件，处理Apache日志和syslog消息，以及使用条件控制过滤器或输出处理哪些事件。

If you need help building grok patterns, try out the ​​Grok Debugger​​. The Grok Debugger is an X-Pack feature under the Basic License and is therefore free to use.

Configuring Filters

Filters are an in-line processing mechanism that provide the flexibility to slice and dice your data to fit your needs. Let’s take a look at some filters in action. The following configuration file sets up the ​​grok​​​ and ​​date​​ filters.

筛选器是一种在线处理机制，可灵活地对数据进行切片和切块，以满足您的需求。让我们看一下一些实际使用的过滤器。以下配置文件设置​​grok​​​和​​date​​过滤器。

input { stdin { } }filter { grok { match => { "message" => "%{COMBINEDAPACHELOG}" } } date { match => [ "timestamp" , "dd/MMM/yyyy:HH:mm:ss Z" ] }}output { elasticsearch { hosts => ["localhost:9200"] } stdout { codec => rubydebug }}

Run Logstash with this configuration:

bin/logstash -f logstash-filter.conf

Now, paste the following line into your terminal and press Enter so it will be processed by the stdin input:

127.0.0.1 - - [11/Dec/2013:00:01:45 -0800] "GET /xampp/status.php HTTP/1.1" 200 3891 ""Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9; rv:25.0) Gecko/20100101 Firefox/25.0"

You should see something returned to stdout that looks like this:

{ "message" => "127.0.0.1 - - [11/Dec/2013:00:01:45 -0800] \"GET /xampp/status.php HTTP/1.1\" 200 3891 \"\"Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9; rv:25.0) Gecko/20100101 Firefox/25.0\"", "@timestamp" => "2013-12-11T08:01:45.000Z", "@version" => "1", "host" => "cadenza", "clientip" => "127.0.0.1", "ident" => "-", "auth" => "-", "timestamp" => "11/Dec/2013:00:01:45 -0800", "verb" => "GET", "request" => "/xampp/status.php", "=> "1.1", "response" => "200", "bytes" => "3891", "referrer" => "\" "agent" => "\"Mozilla/5.0 (Macintosh; Intel Mac OS X 10.9; rv:25.0) Gecko/20100101 Firefox/25.0\""}

As you can see, Logstash (with help from the ​​grok​​​ filter) was able to parse the log line (which happens to be in Apache "combined log" format) and break it up into many different discrete bits of information. This is extremely useful once you start querying and analyzing our log data. For example, you’ll be able to easily run reports on HTTP response codes, IP addresses, referrers, and so on. There are quite a few grok patterns included with Logstash out-of-the-box, so it’s quite likely if you need to parse a common log format, someone has already done the work for you. For more information, see the list of ​​Logstash grok patterns​​ on GitHub.

如您所见，Logstash（在​​grok​​​过滤器的帮助下）能够解析日志行（碰巧是Apache的“组合日志”格式），并将其分解为许多不同的离散信息位。一旦开始查询和分析我们的日志数据，这将非常有用。例如，您将能够轻松地运行有关HTTP响应代码，IP地址，引荐来源网址等的报告。Logstash包含很多现成的grok模式，因此很有可能如果您需要解析一种通用的日志格式，那么有人已经为您完成了工作。有关更多信息，请参见GitHub上的​​Logstash grok模式​​列表。

The other filter used in this example is the ​​date​​​ filter. This filter parses out a timestamp and uses it as the timestamp for the event (regardless of when you’re ingesting the log data). You’ll notice that the ​​@timestamp​​ field in this example is set to December 11, 2013, even though Logstash is ingesting the event at some point afterwards. This is handy when backfilling logs. It gives you the ability to tell Logstash "use this value as the timestamp for this event".

本示例中使用的另一个过滤器是​​date​​​过滤器。该过滤器解析出一个时间戳，并将其用作事件的时间戳（无论何时获取日志数据）。您会注意到​​@timestamp​​，即使Logstash随后在某个时候提取事件，此示例中的字段也设置为2013年12月11日。当回填日志时，这很方便。它使您能够告诉Logstash“使用此值作为此事件的时间戳”。

Processing Apache Logs

Let’s do something that’s actually useful: process apache2 access log files! We are going to read the input from a file on the localhost, and use a ​​conditional​​ to process the event according to our needs. First, create a file called something like logstash-apache.conf with the following contents (you can change the log’s file path to suit your needs):

input { file { path => "/tmp/access_log" start_position => "beginning" }}filter { if [path] =~ "access" { mutate { replace => { "type" => "apache_access" } } grok { match => { "message" => "%{COMBINEDAPACHELOG}" } } } date { match => [ "timestamp" , "dd/MMM/yyyy:HH:mm:ss Z" ] }}output { elasticsearch { hosts => ["localhost:9200"] } stdout { codec => rubydebug }}

Then, create the input file you configured above (in this example, "/tmp/access_log") with the following log entries (or use some from your own webserver):

71.141.244.242 - kurt [18/May/2011:01:48:10 -0700] "GET /admin HTTP/1.1" 301 566 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3"134.39.72.245 - - [18/May/2011:12:40:18 -0700] "GET /favicon.ico HTTP/1.1" 200 1189 "-" "Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2; .NET4.0C; .NET4.0E)"98.83.179.51 - - [18/May/2011:19:35:08 -0700] "GET /css/main.css HTTP/1.1" 200 1837 ""Mozilla/5.0 (Windows NT 6.0; WOW64; rv:2.0.1) Gecko/20100101 Firefox/4.0.1"

Now, run Logstash with the -f flag to pass in the configuration file:

bin/logstash -f logstash-apache.conf

Now you should see your apache log data in Elasticsearch! Logstash opened and read the specified input file, processing each event it encountered. Any additional lines logged to this file will also be captured, processed by Logstash as events, and stored in Elasticsearch. As an added bonus, they are stashed with the field "type" set to "apache_access" (this is done by the type ⇒ "apache_access" line in the input configuration).

In this configuration, Logstash is only watching the apache access_log, but it’s easy enough to watch both the access_log and the error_log (actually, any file matching ​​*log​​),

input { file { path => "/tmp/*_log"...

When you restart Logstash, it will process both the error and access logs. However, if you inspect your data (using elasticsearch-kopf, perhaps), you’ll see that the access_log is broken up into discrete fields, but the error_log isn’t. That’s because we used a ​​grok​​ filter to match the standard combined apache log format and automatically split the data into separate fields. Wouldn’t it be nice if we could control how a line was parsed, based on its format? Well, we can…

Note that Logstash did not reprocess the events that were already seen in the access_log file. When reading from a file, Logstash saves its position and only processes new lines as they are added. Neat!

Using Conditionals

You use conditionals to control what events are processed by a filter or output. For example, you could label each event according to which file it appeared in (access_log, error_log, and other random files that end with "log").

您可以使用条件控件来控制过滤器或输出处理哪些事件。例如，您可以根据事件在哪个文件中的出现（access_log，error_log以及其他以“ log”结尾的随机文件）来标记每个事件。

input { file { path => "/tmp/*_log" }}filter { if [path] =~ "access" { mutate { replace => { type => "apache_access" } } grok { match => { "message" => "%{COMBINEDAPACHELOG}" } } date { match => [ "timestamp" , "dd/MMM/yyyy:HH:mm:ss Z" ] } } else if [path] =~ "error" { mutate { replace => { type => "apache_error" } } } else { mutate { replace => { type => "random_logs" } } }}output { elasticsearch { hosts => ["localhost:9200"] } stdout { codec => rubydebug }}

This example labels all events using the ​​type​​​ field, but doesn’t actually parse the ​​error​​​ or ​​random​​ files. There are so many types of error logs that how they should be labeled really depends on what logs you’re working with.

Similarly, you can use conditionals to direct events to particular outputs. For example, you could:

alert nagios of any apache events with status 5xxrecord any 4xx status to Elasticsearchrecord all status code hits via statsd

To tell nagios about any event that has a 5xx status code, you first need to check the value of the ​​type​​​ field. If it’s apache, then you can check to see if the ​​status​​​ field contains a 5xx error. If it is, send it to nagios. If it isn’t a 5xx error, check to see if the ​​status​​​ field contains a 4xx error. If so, send it to Elasticsearch. Finally, send all apache status codes to statsd no matter what the ​​status​​ field contains:

要告诉nagios任何具有5xx状态代码的{ if [type] == "apache" { if [status] =~ /^5\d\d/ { nagios { ... } } else if [status] =~ /^4\d\d/ { elasticsearch { ... } } statsd { increment => "apache.%{status}" } }}

Processing Syslog Messages

Syslog is one of the most common use cases for Logstash, and one it handles exceedingly well (as long as the log lines conform roughly to RFC3164). Syslog is the de facto UNIX networked logging standard, sending messages from client machines to a local file, or to a centralized log server via rsyslog. For this example, you won’t need a functioning syslog instance; we’ll fake it from the command line so you can get a feel for what happens.

First, let’s make a simple configuration file for Logstash + syslog, called logstash-syslog.conf.

filter { if [type] == "syslog" { grok { match => { "message" => "%{SYSLOGTIMESTAMP:syslog_timestamp} %{SYSLOGHOST:syslog_hostname} %{DATA:syslog_program}(?:\[%{POSINT:syslog_pid}\])?: %{GREEDYDATA:syslog_message}" } add_field => [ "received_at", "%{@timestamp}" ] add_field => [ "received_from", "%{host}" ] } date { match => [ "syslog_timestamp", "MMM d HH:mm:ss", "MMM dd HH:mm:ss" ] } }}output { elasticsearch { hosts => ["localhost:9200"] } stdout { codec => rubydebug }}

Run Logstash with this new configuration:

bin/logstash -f logstash-syslog.conf

Normally, a client machine would connect to the Logstash instance on port 5000 and send its message. For this example, we’ll just telnet to Logstash and enter a log line (similar to how we entered log lines into STDIN earlier). Open another shell window to interact with the Logstash syslog input and enter the following command:

telnet localhost 5000

Copy and paste the following lines as samples. (Feel free to try some of your own, but keep in mind they might not parse if the ​​grok​​ filter is not correct for your data).

Dec 23 12:11:43 louis postfix/smtpd[31499]: connect from unknown[95.75.93.154]Dec 23 14:42:56 louis named[16000]: client 199.48.164.7#64817: query (cache) 'amsterdamboothuren.com/MX/IN' deniedDec 23 14:30:01 louis CRON[619]: (CMD (php /usr/share/cacti/site/poller.php >/dev/null 2>/var/log/cacti/poller-error.log)Dec 22 18:28:06 louis rsyslogd: [origin software="rsyslogd" swVersion="4.2.0" x-pid="2253" x-info="rsyslogd was HUPed, type 'lightweight'.

Now you should see the output of Logstash in your original shell as it processes and parses messages!

{ "message" => "Dec 23 14:30:01 louis CRON[619]: (CMD (php /usr/share/cacti/site/poller.php >/dev/null 2>/var/log/cacti/poller-error.log)", "@timestamp" => "2013-12-23T22:30:01.000Z", "@version" => "1", "type" => "syslog", "host" => "0:0:0:0:0:0:0:1:52617", "syslog_timestamp" => "Dec 23 14:30:01", "syslog_hostname" => "louis", "syslog_program" => "CRON", "syslog_pid" => "619", "syslog_message" => "(CMD (php /usr/share/cacti/site/poller.php >/dev/null 2>/var/log/cacti/poller-error.log)", "received_at" => "2013-12-23 22:49:22 UTC", "received_from" => "0:0:0:0:0:0:0:1:52617", "syslog_severity_code" => 5, "syslog_facility_code" => 1, "syslog_facility" => "user-level", "syslog_severity" => "notice"}

版权声明：本文内容由网络用户投稿，版权归原作者所有，本站不拥有其著作权，亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容，请联系我们jiasou666@gmail.com 处理，核实后本网站将在24小时内删除侵权内容。