feign的ribbon超时配置和hystrix的超时配置说明

网友投稿 360 2022-11-19


feign的ribbon超时配置和hystrix的超时配置说明

先看下我的配置:

ribbon:

MaxAutoRetries: 1 #最大重试次数,当Eureka中可以找到服务,但是服务连不上时将会重试

MaxAutoRetriesNextServer: 1 #切换实例的重试次数

OkToRetryOnAllOperations: false # 对所有的操作请求都进行重试,如果是get则可以,如果是post,put等操作没有实现幂等的情况下是很危险的,所以设置为false

ConnectTimeout: 1000 #请求连接的超时时间

ReadTimeout: 1800 #请求处理的超时时间

hystrix:

command:

default:

execution:

isolation:

thread:

timeoutInMilliseconds: 3000

#如果配置ribbon的重试,hystrix的超时时间要大于ribbon的超时时间,ribbon才会重试

#hystrix的超时时间=(1 + MaxAutoRetries + MaxAutoRetriesNextServer) * ReadTimeout 比较好,具体看需求

Ribbon超时与Hystrix超时问题,为了确保Ribbon重试的时候不被熔断,我们就需要让Hystrix的超时时间大于Ribbon的超时时间,否则Hystrix命令超时后,该命令直接熔断,重试机制就没有任何意义了。

从上面的配置来说,ribbon超时配置为1800,请求超时后,该实例会重试1次,更新实例会重试1次。

所以hystrix的超时时间要大于 (1 + MaxAutoRetries + MaxAutoRetriesNextServer) * ReadTimeout 比较好,具体看需求进行配置。

Ribbon超时与Hystrix超时问题,为了确保Ribbon重试的时候不被熔断,我们就需要让Hystrix的超时时间大于Ribbon的超时时间,否则Hystrix命令超时后,该命令直接熔断,重试机制就没有任何意义了。

补充知识:Spring Cloud Feign 第一次调用超时(Read timed out)的解决办法

feign-client在第一次调用微服务会出现Read timed out异常,提示的报错信息:

java.net.SocketTimeoutException: Read timed out

这是由于在调用其他微服务接口前,会去请求该微服务的相关信息(地址、端口等),并做一些初始化操作,由于默认的懒加载特性,导致了在第一次调用时,出现超时的情况,解决方法主要有两种:

第一种办法是设置超时时间,具体设置成多少,因项目而异,配置如下:

# 全局关闭Hystrix超时,对所有微服务有效

hystrix.command.default.execution.timeout.enabled: false

# 关闭某一个微服务的超时

hystrix.command..execution.timeout.enabled: false

# 全局设置超时时间为60秒

hystrix.command.default.execution.isolation.thread.timeoutInMilliseconds: 60000

# 设置某一个微服务的超时时间为60秒

hystrix.command..execution.isolation.thread.timeoutInMilliseconds: 60000

# 设置ribbon超时时间

ribbon:

ReadTimeout: 20000

ConnectTimeout: 20000

第二种办法,也是比较推荐的方式,配置ribbon立即加载,此处需要注意的是,光配置立即加载是不生效的,还要配置客户端列表,配置如下,详细配置请点击:

ribbon:

eager-load:

enabled: true

clients: distribution, material-product, outer-data

最后附上未开启立即加载时,第一次调用打印的日志:

2019-05-27 18:05:33.819|INFO|1986|http-nio-18884-exec-2|clipcloud-configuration|3752c9412075144e|3752c9412075144e|false|com.migu.clipcloud.configuration.ConfigurationServiceApplication.test1-55|time:2019-05-27 18:05:33.819

2019-05-27 18:05:33.826|INFO|1986|hystrix-distribution-1|clipcloud-configuration|3752c9412075144e|405382c2fc629614|false|com.migu.clipcloud.services.client.FeignHeadConfiguration.lambda$requestInterceptor$2-51|add request header for feignclient, key:cookie,value:jsESSIONID.8250e395=node08z98wvylx12lwh89c6v09qk92.node0; screenResolution=1440x900; m=2258:cmFiYml0bXE6cmFiYml0bXE%253D

2019-05-27 18:05:33.828|INFO|1986|hystrix-distribution-1|clipcloud-configuration|3752c9412075144e|405382c2fc629614|false|org.springframework.context.support.AbstractApplicationContext.prepareRefresh-588|Refreshing SpringClientFactory-distribution: startup date [Mon May 27 18:05:33 CST 2019]; parent: org.springframework.boot.web.servlet.context.AnnotationConfigServletWebServerApplicationContext@203dd56b

2019-05-27 18:05:33.850|INFO|1986|hystrix-distribution-1|clipcloud-configuration|3752c9412075144e|405382c2fc629614|false|org.springframework.beans.factory.annotation.AutowiredAnnotationBeanPostProcessor.-153|JSR-330 'javax.inject.Inject' annotation found and supported for autowiring

2019-05-27 18:05:33.864|INFO|1986|hystrix-distribution-1|clipcloud-configuration|3752c9412075144e|405382c2fc629614|false|com.netflix.config.ChainedDynamicProperty$ChainLink.checkAndFlip-115|Flipping property: distribution.ribbon.ActiveConnectionsLimit to use NEXT property: niws.loadbalancer.availabilityFilteringRule.activeConnectionsLimit = 2147483647

2019-05-27 18:05:33.865|INFO|1986|hystrix-distribution-1|clipcloud-configuration|3752c9412075144e|405382c2fc629614|false|com.netflix.util.concurrent.ShutdownEnabledTimer.-58|Shutdown hook installed for: NFLoadBalancer-PingTimer-distribution

2019-05-27 18:05:33.866|INFO|1986|hystrix-distribution-1|clipcloud-configuration|3752c9412075144e|405382c2fc629614|false|com.netflix.loadbalancer.BaseLoadBalancer.initWithConfig-192|Client: distribution instantiated a LoadBalancer: DynamicServerListLoadBalancer:{NFLoadBalancer:name=distribution,current list of Servers=[],Load balancer stats=Zone stats: {},Server stats: []}ServerList:null

2019-05-27 18:05:33.884|INFO|1986|hystrix-distribution-1|clipcloud-configuration|3752c9412075144e|405382c2fc629614|false|com.netflix.loadbalancer.DynamicServerListLoadBalancer.enableAndInitLearnNewServersFeature-222|Using serverListUpdater PollingServerListUpdater

2019-05-27 18:05:33.886|INFO|1986|hystrix-distribution-1|clipcloud-configuration|3752c9412075144e|405382c2fc629614|false|com.netflix.config.ChainedDynamicProperty$ChainLink.checkAndFlip-115|Flipping property: distribution.ribbon.ActiveConnectionsLimit to use NEXT property: niws.loadbalancer.availabilityFilteringRule.activeConnectionsLimit = 2147483647

2019-05-27 18:05:33.887|INFO|1986|hystrix-distribution-1|clipcloud-configuration|3752c9412075144e|405382c2fc629614|false|com.netflix.loadbalancer.DynamicServerListLoadBalancer.restOfInit-150|DynamicServerListLoadBalancer for client distribution initialized: DynamicServerListLoadBalancer:{NFLoadBalancer:name=distribution,current list of Servers=[192.168.26.103:18887],Load balancer stats=Zone stats: {defaultzone=[Zone:defaultzone; DBWkvYInstance count:1; Active connections count: 0; Circuit breaker tripped count: 0; Active connections per server: 0.0;]

},Server stats: [[Server:192.168.26.103:18887; Zone:defaultZone; Total Requests:0; Successive connection failure:0; Total blackout seconds:0; Last connection made:Thu Jan 01 08:00:00 CST 1970; First connection made: Thu Jan 01 08:00:00 CST 1970; Active Connections:0; total failure count in last (1000) msecs:0; average resp time:0.0; 90 percentile resp time:0.0; 95 percentile resp time:0.0; min resp time:0.0; max resp time:0.0; stddev resp time:0.0]

]}ServerList:org.springframework.cloud.netflix.ribbon.eureka.DomainExtractingServerList@173441c2

2019-05-27 18:05:33.906|INFO|1986|http-nio-18884-exec-2|clipcloud-configuration|3752c9412075144e|3752c9412075144e|false|com.migu.clipcloud.configuration.ConfigurationServiceApplication.test1-57|time:2019-05-27 18:05:33.906

2019-05-27 18:05:34.888|INFO|1986|PollingServerListUpdater-0|clipcloud-configuration||||com.netflix.config.ChainedDynamicProperty$ChainLink.checkAndFlip-115|Flipping property: distributiDBWkvYon.ribbon.ActiveConnectionsLimit to use NEXT property: niws.loadbalancer.availabilityFilteringRule.activeConnectionsLimit = 2147483647


版权声明:本文内容由网络用户投稿,版权归原作者所有,本站不拥有其著作权,亦不承担相应法律责任。如果您发现本站中有涉嫌抄袭或描述失实的内容,请联系我们jiasou666@gmail.com 处理,核实后本网站将在24小时内删除侵权内容。

上一篇:如何使用Jenkins构建GIT+Maven项目
下一篇:IDEA 将 SpringBoot 项目打包成jar的方法
相关文章

 发表评论

暂时没有评论,来抢沙发吧~